Sanyo Split System Air Conditioner. High Pressure Machine.

Machine which raises the pressure of a gas, a vapor or a mixture of gases and vapors. The fluid pressure is raised by reducing the specific volume of the same during its passage through the compressor. Compared with centrifugal fans and turbo blowers or axial movement, as to the output pressure of the compressors are generally classified as high pressure machines.

The compressors are used to increase the pressure of a variety of gases and vapors to a large number of applications. The utility under study is the refrigeration compressor, used to compress the gas in the vaporizer. Other applications include chemical processing, conducting gases, gas turbines and construction.

Sanyo Split System. Rotary Compressor.

This replaces the reciprocating compressor of the piston by an eccentric circular movement. First I must say that the motor and compressor are within the crankcase of welded steel plate, where there are in this carter cooling fins. The compression part and the rotor are fixed in common vertical column. As already mentioned the gas which is sucked enters the cylindrical cavity pushed by an eccentric compressing and discharging a longitudinal perforation (discharge line) which runs the entire compressor, therefore in these high temperature compressors observe inside the compressor .

Sanyo Split System Air Conditioner Manual. Scroll Compressor.

Its appearance is similar to rotary compressor. The difference in these different compression method. This compressor compresses using two coils as shown in the photographs, one is fixed and the other moves on this, reducing the volume and performing a continuous compression, which makes its performance will increase substantially. Moreover, this compressor has few moving parts and therefore reduces vibration and noise tolerance and have the admission of refrigerant in liquid form.

Sanyo Split System Manual. Hermetic Compressor.

This was developed in an effort to achieve a reduction in size and cost and is widely used in low-power unitary equipment. These compressors in case of failure, are replaced due to inaccessibility by type of construction.

The application of these compressors range from small powers as refrigerators, commercial equipment, household air conditioners through different power to small chillers considerable power.