Fujitsu Mini Split System – Indoor and Outdoor Units.

It is the part of the HVAC system that is located outside of the room to be air conditioned. Usually the compressor is located in the outdoor unit or condenser. It is the part of the HVAC system that is located inside of the room to be air conditioned. These types of units can be duct, wall, floor, ceiling, cassette. Compact units ideal for installation in restaurants, open-plan offices, apartments, ultimately for irregular shaped rooms with air discharge grilles as designed to ensure uniform ambient temperatures, the grids are only visible return and drive. These units range from 1,800 W to 2.350w.

Best Mini Split System – Wall and Floor Units.

 

Compact units to install on any wall and in any environment. These units range from 1800 W to 6350 W (six models) in order to adapt to customer needs and can be used both in single mounts (1×1) and in multiple assemblies. Compact units for installing against a wall or recessed into it. These units range from 2350 W to 6350 W (six models) in order to adapt to customer needs and can be used both in single mounts (1×1) and in multiple assemblies.

Fujitsu Mini Split – R-410A Refrigerant.

There are several companies in the world with joint manufacturing of air conditioning and refrigerant gases. Due to constant research, has its range of home with refrigerant R-410A chlorine-free, with a higher yield (high COP), respecting the environment (zero ODP). Some empreas has redesigned its new R-410A equipment to get yields higher than R-22.
 
The refrigerant R-410A uses the same oil ether R-407C and has another important advantage in practice is azeotropic, so when a leak is still R-410A, which is easy to recover and reuse. With a heat transfer capacity 40% greater than the R-22 and R-407C, teams with R-410A has a 15% better performance than those of R-407C. So, true to its policy of technological innovation, presents its range of home with R-410A.

Mitsubishi Mini Split Systems – Refrigeration.

 

Is defined as the process of reducing and maintaining the temperature of a subject space or below the ambient temperature. A refrigerant is a calorific heat moves one space to be cooled to the outside. To reduce or maintain the temperature of a space below the ambient temperature, heat must be extracted from the space and transferred to another body which is lower than the temperature of the refrigerated space. This makes the refrigerant.