Multi Split AC – Electronic Component.

If the compressor in your air conditioner operates, but does not feel like he was blowing cold air, it is possible that the capacitor has blown compressor. A capacitor is an electronic component used to store a charge and current block so you can pass an alternating current. It takes about an hour to connect the AC condenser.

Multi Split Klima – Turn Off.

Turn off the power to the compressor of the air conditioner from the main circuit breaker. Open the access panel to compressor assembly by removing the retaining screws with a screwdriver

Multisplit Daikin – Wires.

Locate the capacitor and examines the three wires going to the old capacitor. The cables are marked "Fan", "Herm" and "C" commonly. Pregnant three roles in the wires to mark them and then remove the wires from the top of the condenser releasing old with a screwdriver. Remove the metal bracket that holds the old condenser in place, if there is one, using a screwdriver.

Multi Split Inverter – Turn On.

Place the capacitor back in place. Adjust it with a screwdriver. Connect the wires marked with corresponding terminals on the new capacitor, using the screwdriver. Replace the access panel to the compressor and resumes the flow of energy to the unit.