Water Heating Systems in Rockford – What Should I Know about Furnace Cleaning?

Built-up dirt and grime can be a lead to a less efficient furnace, with the furnace needing to burn more fuel to create the same amount of heat. Furnace cleaning isn’t difficult, and only takes a few supplies: a screwdriver, a vacuum, a new filter, and some dry rags. Before beginning, however, there are a few things that you should know.

Geothermal Energy Systems in Rockford – Furnace Cleaning.

A furnace works in a very simple way. Cold air is brought into the furnace, and sent through the filter. After that, the air is heated up, and then sent up through the flue and into the home through a series of ducts. Any dust, mold, or other contaminants in the furnace system are carried through this heated air and into a home, where it can be breathed in by the people that live there. A clean furnace will send clean air into the household.

Air Heating Systems in Rockford – Use the Vacuum.

Use the vacuum to get any loose debris along the base of the furnace and from around the burners. While the furnace is open, check for any wear and tear on the fan belts. If the belts look dry, glazed, or are cracked, or if they are loose, they may need to be replaced. The bearings of older furnaces should be oiled with a non-detergent motor oil.

Solar Water Heating Systems in Rockford – Furnace Air Ducts.

Furnace air ducts should be cleaned thoroughly once every couple years. It is almost impossible to clean furnace air ducts without professional equipment, so most people have to hire a company to come in and do this job for them. Families that suffer from allergies should have this done yearly, because mold and mildew can grow inside ducts.