Changing a Mini Split Air Conditioner in Akron – How Do I Clean an Air Conditioner?
A clean air conditioner can save you money. First, your unit will run more efficiently. Second, by preventing expensive repairs that could be avoided. Most people can clean an air conditioner in about four hours or so. Because cleaning your central air conditioning unit will reveal any major problems that your air conditioner might be hiding, you should consider cleaning it before you really need to use it.
There are two components of a central air system. When you clean an air conditioner, you should start with the outside unit. This is called the compressor or condenser and it may be square or round and located on a cement slab. The evaporator is the indoor unit and should be connected to the duct work, usually near the furnace.
The next step when you clean an air conditioner might be impossible or maybe just very difficult. You’ll need to vacuum the bottom of the evaporator or indoor unit. If you can’t get to the indoor unit, be sure to have that done once every two years or so by a professional. The next step is to change the air filter, probably located in the furnace. You want the air flowing into the ducts to be as clean as possible. Filters are usually a minimal cost but for a little more you can install a high quality filter which might help with allergens inside the house.
Finally, check the condensation tube probably near the furnace. Make sure that it’s not clogged. The tube may be flexible and easy to remove and clean. Clean hard tubes with a bleach solution consisting of one part bleach and 16 parts water, and pour into the tube. You can even help the process with a wire. Otherwise, it will need to cut off and rewelded. At that point it should be left to a professional.
Mini Split AC in the USA 