Archives For author
« Older Entries
Newer Entries »
By minisplitwarehouse | Link
March 29, 2014 //
0

Ductless Air Conditioning Installation in Richmond – What is a Spot Cooler?

A spot cooler is a portable air conditioning unit designed for temporary use in a location where there is no existing air conditioning or when additional cooling is needed. Examples of locations where a spot cooler may be used include offices, factories, computer rooms, residential rental property, and seasonal or temporary businesses set up in a rental location. A spot cooler is also a type of machinery or tool that is used in conjunction with an air compressor to “spot cool” a specific part during the manufacture of various products.

Installing Ductless Air Conditioner in Richmond – Spot Cooler.

As a portable air conditioning unit, a spot cooler works much like a window air conditioning unit in that it is powered by electricity and pulls air into a condensing unit, cools it, and circulates it back into the room. However, the unit itself is on wheels, making it portable. Like any air conditioning unit, a spot cooler’s performance capabilities are measured in British Thermal Units (BTU). A BTU is the amount of heat needed to lower or raise the temperature of water one degree Fahrenheit. Most single room air conditioning units range from 11,000 BTU to 30,000 BTU.

How to Install Mini Split AC in Richmond? Cool a Home.

Similarly, a spot cooler can serve to cool a home on a temporary basis. Many tenants of rental homes with no central air do not want to invest in central air, but use a spot cooler instead. The investment in a spot cooler may be greater than that for a window unit, but the spot cooler may prove more energy efficient to operate.

How to Install Ductless Air Conditioner in Richmond? Business or Home.

Any business or home with access to an electric supply can utilize a spot cooler. They can be purchased or rented depending on need. The average cost to purchase a spot cooler is around 1,000 US dollars (USD).

Categories Uncategorized
By minisplitwarehouse | Link
March 29, 2014 //
0

Lg Mini Split Heat Pump in Arlington – What Is a Damper Actuator?

Part of a heating, ventilation, and air conditioning (HVAC) system, a damper actuator controls the opening and closing of a damper. Opening the damper allows air from outside a building to enter, in order to cool the interior, or it can close to contain the inside air. Damper actuators are available from manufacturers in both electrical and pneumatic configurations. Spring return, rotary, and linear variations are made as well. Which kind of damper actuator used depends on the type and configuration of the HVAC system in the building.

Fujitsu Mini Split Heat Pump in Arlington – Damper Actuator.

The purpose of a damper actuator is to allow an HVAC system to bring in outside air, or move the damping system in such a way that air cannot get in. An air conditioning system may not have to be run at the power needed to cool every space in a building. If the outside temperature is suitable, then making use of outside air is cost-effective and less straining on the overall mechanical system. Air that is further cooled in the system will enter the building, and the actuator can also push warm air out as the air within cools.

Mini Splits Heat Pump in Arlington – Electric Actuators.

In systems that are controlled by air pressure, pneumatic damper actuators are used. These typically have a spring that moves the actuator, which is activated by changes in air pressure within the control system. Electric actuators, in contrast, are controlled by motors. Other types of actuators for HVAC dampers include spring-return, as well as non spring-return actuators which are generally driven by motors.

Mitsubishi Mini Split Heat Pump in Arlington – A Solenoid.

A solenoid is sometimes included in a damper actuator. This helps to open and close the damper part by converting the available energy into the motion needed to do the task. Commercial HVAC systems usually implement stainless steel solenoids that can tolerate corrosive environments. 
 

Categories Uncategorized
By minisplitwarehouse | Link
March 29, 2014 //
0

 

Ductless Air Conditioning Installation in Chesapeake – What Is an Attic Exhaust Fan?

An attic exhaust fan typically is an electrical-powered fan mounted in such a way as to remove hot air from attic spaces. Most units come equipped with an electronic or mechanical thermostat that automatically turns the power on when attic temperatures reach a specified level. Various styles are available from different manufacturers. Installation methods are similar.

How to Install a Split Unit AC in Chesapeake? Attic Exhaust Fan.

There are many benefits associated with the ventilation provided by an attic exhaust fan. Ideally, the air temperature inside the attic should be the same as the outdoor temperature. This will eliminate moisture on interior surfaces of the attic and underneath roofing materials. Asphalt roofing products will last much longer with a well-ventilated attic.

Mini Split AC Installation in Chesapeake – Installation.

If the attic exhaust fan motor ever wears out, the fan motor can usually be replaced without a complete installation of a new unit. This procedure is easily accomplished from inside the attic rather than from on the roof. Thermostats are also easily replaced. One should be sure that the power is turned off at the main breaker box before attempting these repairs.

How to Install Ductless Air Conditioner in Chesapeake? Installing an Attic Exhaust Fan.

Installing an attic exhaust fan is a home improvement that quickly pays for itself. Savings in air conditioning costs far outweigh the cost of electricity for running the fan. The elimination of moisture and excessive heat extends the life of asphalt roof products.

Categories Uncategorized
By minisplitwarehouse | Link
March 29, 2014 //
0

Split Air Conditioner Ratings in Norfolk – What is an Oscillating Fan?

An oscillating fan is a fan that rotates side to side while blowing. A great alternative to box fans for cooling rooms, this type of fan creates a breeze throughout the room rather than just blowing in one direction. Oscillating fans generally have either a base or a stand that is stationary, while the unit that houses the fan moves separately.

AC Split System Price in Norfolk – Oscillating Fan.

There are many different sizes of oscillating fans, and a great many of them have different settings. The most versatile kind has a setting that allows the fan to remain stationary, blowing in only one direction, or alternately to oscillate, or move side to side. Another feature of a versatile oscillating fan is the ability to direct the breeze it creates at different angles. This is sometimes achieved with a unit that pivots up and down, or may be accomplished with an adjustable pole-like stand.

Some oscillating fans are a combination unit with both a heat and a cool setting. The unit in these combinations rotates the same way and either blows heated air or operates on the standard fan setting, making these combination space heater/fans practical for year-round use. A few combination models even include digital thermostatic controls for heat operation.

Split Unit Air Conditioners Price in Norfolk – Summer Cooling Needs.

Depending on your summer cooling needs, these types of fans are often much more efficient at circulating air throughout a room than a standard box fan. Most models of oscillating fans or combination heater units are more expensive than standard box fans, but provide more versatile uses and efficiency. Remember to periodically check fans or space heaters as a safety precaution. Pay attention to damaged cords or plugs, make sure to watch small children around any type of fan covered with a grill that allows small fingers to fit through, and never leave a space heater running unattended.

Categories Uncategorized
By minisplitwarehouse | Link
March 29, 2014 //
0

Mitsubishi Dual Zone Mini Split in Hampton – What Is a Temperature Transducer?

A temperature transducer is an electrical device usually used in automated air-temperature control sequences. Its purpose is to take a measurement of the air temperature and relay the information — after translating it into a readable form — to a power source for the mechanical part of the system. Once the information has been taken by the temperature transducer and relayed, the information is sent to the unit power source. 

Fujitsu Dual Zone Mini Split in Hampton – Temperature Transducer.

Usually, when a transducer is telling a mechanical unit, such as a furnace or a cooling system, that it needs to engage in order to create the desired temperature, it will also tell the unit when it has reached that desired temperature. This signals the unit to disengage, allowing for the efficient operation of many central air or heating units.

Dual Mini Split in Hampton – Air Temperature.

The transducer measures the air temperature and translates it into information the screen is able to display at the same time the information is being sent to the power source telling it whether or not to engage.

Dual Zone Mini Split in Hampton – Digital Screen.

These transducers can also be used in a number of useful applications, from telling an individual the outside temperature from inside the house or building, to informing researchers at what temperature a certain chemical or physical reaction happens. The transducer itself is basically a sensor that has the ability to transfer the information it obtains to another medium in a form different than it was originally read. This information can be translated back to a digital screen, without having to tell any sort of mechanical unit to actuate, disengage, or take no action.

Categories Uncategorized
By minisplitwarehouse | Link
March 29, 2014 //
0

Mitsubishi HVAC Cost in Worcester – What Is a Compressor Capacitor?

A compressor capacitor is an electronic component that attaches to an air conditioning system's compressor unit. It stores and releases electrical energy to run the compressor at the initial start up and during operation. In fact, there are two compressor capacitor types, including start and run versions.

Mini Split Installation Cost in Worcester – Compressor Capacitor.

This specialized electronic component normally resembles a small cylinder with positive and negative terminals protruding from one end. The compressor capacitor attaches directly to the compressor's electrical supply. Energy within the capacitor maintains the compressor and fan motor speed at a consistent power level. As a result, the compressor and fan have long lifespans.

Mini Split Cost in Worcester – Air Conditioning System.

Over time, a compressor capacitor can fail. Most compressors are located outside since they can be relatively loud during operation. As a result, these electronic components are prone to failure because of old age or weathering the elements. An air conditioning system that fails to activate may indicate a bad capacitor. Alternatively, the compressor and fan may not activate while the inside components try to operate.

Fujitsu Mini Split Cost in Worcester – A Bad Capacitor.

A bad capacitor can look enlarged or even dented. Many homeowners replace the capacitor on their own, although care must be taken in doing so. All electrical power must be removed from the air conditioning system to prevent accidental electrocution. The repair person should note the colored wiring attached to each capacitor terminal for correct attachment to the new component.
 

Categories Uncategorized
By minisplitwarehouse | Link
March 28, 2014 //
0

Mini Split AC System in Virginia Beach – What Is an Absorption System?

An absorption system is a means of refrigeration or air conditioning where cooling is achieved using a fluid or gas combination and a heat source. Unlike conventional compressor driven systems, absorption cooling utilizes a secondary absorbent fluid and heat from a propane or kerosene flame to create the pressure differential necessary to circulate the refrigerant. The rest of the basic refrigerant cooling cycle is shared by both systems, however. There are two basic types of absorption system: lithium bromide/water and ammonia/water. The absence of a compressor makes the absorption system appropriate for applications where mains power is unavailable or unreliable.

Mini Split Ductless Air Conditioner in Virginia Beach – Absorption System.

The main difference between compressor and absorption systems is the method used to pressurize and circulate the refrigerant. Absorption cooling appliances do not use a compressor but rather rely on the energy from an external heat source to drive the system. This heat source is typically a propane or kerosene flame, although solar heating is becoming more popular as an energy component. Apart from this fundamental departure, absorption refrigerators and air conditioners use the same basic principle of heat transfer as that of their compressor driven counterparts.

Mini-split Ductless Air Conditioning System in Virginia Beach – Types of Absorption System.

There are two basic types of absorption system, each working in a similar fashion but suitable for different temperature ranges. The first is the lithium bromide/water system for applications when temperatures of 32° F (0° C) and above are required. In these systems, the lithium bromide component is used as an absorbent and the water is the refrigerant agent. The second type of absorption system is the ammonia/water variant used in applications requiring temperatures of 32° F and below. This type of system utilizes the ammonia as a refrigerant and water as an absorbent.

Ductless Air Conditioning Units in Virginia Beach – Generator, Separator, Condenser, Evaporator, and Absorber.

Absorption systems consist of five basic stages: generator, separator, condenser, evaporator, and absorber. The refrigeration process starts in the generator where heat is applied to the refrigerant/absorbent mixture. Here the refrigerant is boiled off to form a gas and flows, with the absorbent, to the separator. The two elements are then removed from each other, and the refrigerant cycles through to the condenser. In the condenser, the refrigerant gas sheds through condensation and its heat regains its liquid state.
 

 

Categories Uncategorized
By minisplitwarehouse | Link
March 28, 2014 //
0

Mini Split SEER 26 in Springfield – What Is a Slot Diffuser?

A slot diffuser is a building component used to deliver air to a room. These diffusers serve as a critical component in a heating, ventilation, and air conditioning (HVAC) system. Unlike traditional square or round diffusers, a slot diffuser features a long, narrow design. This special shape makes it easy for builders to fit these diffusers into tight spaces, and helps to conceal the diffuser from view to create a more aesthetically pleasing design. A slot diffuser may also be known as a linear or linear slot diffuser in some areas.

Mini Split SEER Ratings in Springfield – Slot Diffuser.

Central heating and cooling systems distribute air through a building using a series of metal ducts. A slot diffuser sits at the duct terminal in each room and allows heated or cooled air to enter the space. Each slot diffuser features a linear plenum, or box that fits above the ceiling. This plenum space helps to improve air flow, and allows air to enter the space at an even, steady pace. The surface of the slot diffuser typically features a set of adjustable fins to further control and direct the flow of air.

Mini Split SEER in Springfield – Slot Diffuser Installation Methods

Contractors may utilize a number of slot diffuser installation methods. They are typically concealed within a suspended ceiling, but may also be placed in drywall partitions or ceilings. 

Some designs call for these diffusers to be installed in soffits above a window, or in a built-out area below a window sill. In some applications, the diffuser may even be placed in the floor. In rare cases, linear slot diffusers may also take the place of an exhaust grill to return air from a room back to the heater or air conditioner.
 

Categories Uncategorized
By minisplitwarehouse | Link
March 28, 2014 //
0

Ductless AC Units Reviews in Newport News – Mini Split Systems. 

Today, the mini split is the system more market demand, and the most economical in terms of installation and maintenance. It consists of an indoor unit and outdoor, connected by a tube. Internal on the wall or ceiling, depending on the model and size, and external, located on the balcony, ceiling hung with brackets or directly on the outside wall. 

Ductless AC Units for Sale in Newport News – The Right Size Air Conditioner. 

Do not choose a more powerful computer you need, this results in increased costs and energy waste. It is best that the device has thermostat with numerical readout of temperature and ambient sensors with time and temperature programmer. One degree of cold may incur an 8% of consumption. 

Ductless AC Units in Newport News – Professional Installation. 

Installation must be performed by a professional. To avoid charges, see different quotes before choosing one. To take into account when costs: an air conditioner 3,000 BTU / hour, which runs for one hour consumes about 1.4 kWh. An iron consumes almost double.  Where possible, the outdoor unit must be installed on the south side or in a dark space, more protected from sunlight. 

 

Regulates the air conditioning thermostat at 77 °F maximum. Each grade decreased energy consumption increases by 8%, but no comfort (temperature difference with the top 53.6 ºF outside is unhealthy). When very hot, shut your windows exposed to direct sunlight. So you'll save up to 30% energy and the environment will be better acclimated in less time. It is very important not to leave any open door or window. Otherwise, the appliance will be working constantly and consumption will be higher. In order to maintain the filters be cleaned every two weeks. A dirty filter will worsen air quality and increases consumption. 
Categories Uncategorized
By minisplitwarehouse | Link
March 28, 2014 //
0

1 Ton Mini Split Air Conditioner in Lowell – Properly Sized Room AC. 

As a first step, the most important thing is to identify what our need is to find the right product to beat the heat. Keep in mind that, in many cases, a fan produces the same sensation of comfort that an air conditioner. These can lower the wind chill of a room between 37.4 and 41 °F and have less air conditioning (A/C) energy consumption. 

1 Ton Mini Split Heat Pump in Lowell – BTU.

A second issue to consider is the environment where we have the A/C. It is therefore important to have a team with the right according to the floor space BTU. It is also important to reduce potential alternative heat sources such as computers, lamps and other appliances. Having a team with the right BTU will help to save electricity. 

1 Ton Mini Split in Lowell – Inverter Technology Class A.

Related to the previous point, it is important to avoid the loss of the desired temperature by open windows or doors. Properly close the openings to the outside and prevent drafts. Also use curtains for greater isolation of indoor environments. Acquire equipment with DC inverter technology Class A (high energy efficiency) saves at least 30% -50% of seasonal energy. Although they can be a little more expensive, consume a third of the classic air conditioners. 

5 Ton Mini Split in Lowell – Set the Termostat.

If there is no equipment energy efficient spending, you can make a rational use by following these tips: find an acceptable level of comfort (about 77 °F) and install a thermostat to regulate the air conditioning system. For every degree below the comfort temperature is wasted 8% more energy.
 

 
Categories Uncategorized
« Older Entries
Newer Entries »