Archives For author
« Older Entries
Newer Entries »
By minisplitwarehouse | Link
May 13, 2013 //
0

Trane Packaged Heat Pumps. Selection of each indoor unit.

To select the machines quickly, we can set the name of the model, both its indoor and outdoor units, since in most brands is designated in the name model using nominal cooling capacity.We will choose, in the first instance, the indoor units available of the brand and style selected, whose nominal cooling capacity is the immediate superior to the capacity obtained in the calculation: 

Trane Commercial Heat Pumps. Selecting the Outdoor Unit. 

Outdoor unit will select the smallest capacity available to at least the same number of out, that you want to connect indoor units, and a nominal capacity greater than or equal to the rated capacity of the indoor unit larger capacity:

Trane Heat Pumps Install. Number of indoor units to be installed.

At least install an indoor unit in each room to be cooled, or more indoor units on stays of greatest need, and for a better and more uniform air distribution due to their size and / or shape: Multi-split systems deliver quiet comfort in multiple rooms (up to four) without installing ductwork and with only one outdoor unit. These units are extremely quiet, controlled with an infrared remote control.

Reviews Trane Heat Pumps. Multi Split Type Units

The Multi Split evaporator can have up to 3 internal drives, each has its individual remote control, they can have each other different cooling capacities (Ton. / Btu 's) for independent temperature control ranging from 1 Ton . (12,000 Btu's) and up to 2 Ton (24,000 Btu's). Offers the flexibility to give us quiet comfort and energy efficiency. 

Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

Mini Split Air Conditioner Reviews. "Click"

First, turn off the breakers of the house to avoid any problems with electricity. Withdraw the cap, triggering some kind of tab or button you find in the output of the system, (vary depending on the brand and / or model). After putting pressure on the locking mechanism, we will roll up the sides and will lift the lid until you hear a "click" and locks and lifted.

Lg Mini Split Air Conditioner. Filters.

Once opened the system,  we will find the filters, we should push the pins. Then we get the filters by pulling them down. Will wash the filters in the sink with liquid soap and water,  will wash until you remove all the dirt, but with care not to unclip. Once the filters are very clean, the let dry. 

Mini Split Air Conditioner. Dry Filters.

We can speed up the drying with a dry cloth, being careful not to make too much pressure on the filters. We put the filters in the split or output device air, close the console lid and clean the entire outer casing with a damp cloth. Once finished, lift the breakers of the house and see That our air conditioner does not emit any odor. If your air conditioner is emitting odors after cleaning the filters, there are specific products to clean it.

Mitsubishi Mini Split Air Conditioner. Maintenance.

With the arrival of summer and the heat, the implementation of the air conditioner becomes indispensable. But what also must become unavoidable, is its maintenance, to remove any dirt and prevent bad odors on. It is advisable to clean the filters of air conditioning at least once a year, and lengthen the life of the equipment and, most importantly, we will avoid any kind of health problem. 
 
Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

Mitsubishi Mini Split – Mechanicals or electronic.

Thermostats of this type use physical mechanisms, both for measuring the air temperature to activate the processes that go on and off to change systems. Here we use a variety of technological sensors from bimetallic strips, wax beads, bulbs and tubes filled with air gas. 

Minisplit – Sensors.

These sensors react according to changes in temperature and by expansion or contraction, They activate switches, to raise or lower temperatures. Previously, this type of thermostat contained a mercury filled bulbs, but it was banned a long time ago due to the known problems of this element. 

Mini Split Air Conditioner – Bimetal Strips.

There are different kinds of  thermostats, such as: bimetal strips are most common. and they works by two thin strips of metals such as iron, copper and steel, bonded together and wound into a coil. According to the temperature, the metals expand or contract at different rates, causing the  strips are bending.Then, when the strips are bent enough to touch an electrical contact and complete a circuit. When the temperature returns to change enough to straighten the strip, cut the circuit and the system shuts down. 

Mini Split System – Digital Thermostats.

In the case of digital, the most widely used today. Digital thermostats used instead of electronic sensors to monitor physical changes in temperature. The user programs a given temperature according to your convenience and when the thermostat electronic sensors recorded those amounts, made ​​necessary changes turning on or off the systems.
 

Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

Mitsubishi Ductless Heat Pump – Natural Lighting.

Keep the curtains closed: natural light can help reduce the cost of electricity, however when no one in a room is best to keep the curtains closed during the day. This is especially true for houses with windows to the east and west sides. Prevent direct sunlight from entering the house, helps reduce the amount of effort on your air conditioner to keep the house cool. Open curtains or blinds at night to allow heat to escape through the windows of his house.

Ductless Heat Pump System – Ventilators.

Run a fan: ceiling fans or floor provide fresh air and help move the cool air of the house to ease the workload of the air conditioning. And the energy used by a ventilator is much lower than the air conditioner. Get rid of hot air: use a fan when cooking, to help expel hot air from the house. If you do not have an exhaust fan in the kitchen can use a fan.

Senville Ductless Heat Pump – Removing Moisture.

Use the dehumidifier: If you have a dehumidifier, turn it on when the temperature rises. Ridding your home of moisture will help your family feel comfortable and ease the stress of air conditioning. 
 
Save tasks for the right time: the dishwasher, the washing machine and dryer in the home generate heat, so it is best to leave these tasks for the night or early in the morning when the heat is not so intense.

Ductless Heat Pump Reviews – Natural Plants.

Location of air conditioning: the ideal place for a central air conditioning unit is located on the north side of a house.
 
Landscaping: planting shrubs or trees around your air conditioning unit will help to cool your home as well as help your garden look great. The shadow of this landscape can also be used to avoid direct sunlight in your home.
Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

 

How to Install Ductless Air Conditioning? Energy and acoustic behavior.

The air ducts are the main elements of a central air conditioning system, their properties largely determine the quality of the air system installation, they playing a key role of energy and acoustic behavior.All these types of ducts for air conditioners, must be accepted and regulated by safety standards.

Takes into account several criteria for the installation of this type of system for example, a feature of the area to put up, cost of installation and use, handling of noise, efficient air diffusion, etc.. These facilities take into account the number of people living or working, the type of work they do, not to mention the local characteristics of the component and materials. 

Aircon Ductless Air Conditioner. Safety Standards.

All these types of products for air conditioners, must be accepted and regulated by safety standards, must have the guarantees of several years. Facilities ducted air systems whose main purpose is seek the welfare of the occupants of buildings, both thermally and acoustically, meeting all safety requirements and the rational use of energy.

Mitsubishi Ductless Air Conditioning. Types of Ducts.

If we talk about the types of products for air conditioning, specify the following: Sheet metal ducts, Glass wool products, Flexible ducts.  The sheet metal duct form a duct type air conditioner to which are made ​​from sheet metal plates, galvanized or stainless steel, which are cut to provide the necessary shape to the duct for air distribution. Because metal is a thermal conductor, the sheet metal tubes have to be thermally insulated.
 
 
 

Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

Changing a Mini Split Air Conditioner –  Weatherization.

HVAC system is called one who is able to control indoor air quality,  to remain within a reasonable comfort values ​​of the following parameters: Temperature, Humidity, Indoor Air Quality. Consequently, this system must be able to act on the indoor air to cool and heat, filter and renovate the interior room introducing air from outside.

Uninstalling a Mini Split Air Conditioner – Components.

The components of an air conditioning system are: a) the primary loop, responsible for producing heat and / or cold to be supplied to terminal systems of the HVAC system. Also included within the primary loop distribution systems and energy storage. b) secondary loop, which makes the use of the heat transfer fluid to heat or cool the air.

Installing a Mini Split Air Conditioner – Heating.

Heat flows naturally from high temperatures to low temperatures. However, the heat pump is capable of forcing heat flow in the reverse direction, using a relatively small amount of labor. 
 
Heat pumps can transfer this heat from natural sources in the environment at low temperatures (cold source), such as air, water or the land itself, to the interior rooms that are to be heated, or for use in processes requiring heat in building and industry. 

Wiring a Mini Split Air Conditioner – Refrigeration.

Heat pumps can also be used for cooling. In this case the heat transfer is performed in the opposite direction, that is from the application that requires cold to the environment,  temperature is higher. Sometimes the heat extracted in cooling is used for covering a simultaneous heat demand. 
 
You can take advantage of residual heat from industrial processes such as heat sink, which allows a source known and constant  temperature which improves system performance. 
 

 
Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

Lg Mini Split. Productivity.

Improve the quality of air you breathe, thus contributing to a better health and reduction of allergy symptoms, sinusitis, flu between customers and employees, thus obtaining a higher job performance and lower absenteeism. More comfort for employees and customers. 

Mitsubishi Mini Split. Profitability.

Reduce frequency of cleaning, painting and repairs of office equipment, as it removes dust from ducts, the stains of walls, ceilings, carpets and damaged of the furniture. Also reduce electricity costs, because according to studies, can be reduced by 10% and 20% cooling efficiency, increasing energy savings. Mayor length of the air- conditioning. 

Home Depot Aircon Mini Split. Safety.

Less damage to the computer and office equipment and provides optimal indoor air in different edificicaciones in the office, It is carried out so that occupants enjoy the same excellent environmental conditions to develop effective work activity, thereby achieving the part of employees, better quality and increased profitability of their work.

Mini Split Air Conditioner. Recomendations.

It is highly recommended after performing these operations, proceed to decontaminate with disinfectant misting products non-toxic to humans, it is often not enough to clean the ducts and also need cleaning and disinfection of equipment.
 
Categories Uncategorized
By minisplitwarehouse | Link
May 13, 2013 //
0

Mini Split Air Conditioning Units – Compressor.

Think of the compressor as a kind of "heart" of the system that pumps refrigerant through all the refrigeration components in a large loop. The refrigerant enters the compressor as a low-pressure superheated steam and out of there like a high pressure hot steam. The ability of an Inverter Air Conditioner to control the speed of the compressor motor, eliminates stop-start cycles.

Mini Split System Installation- Condenser.

From the compressor, the hot refrigerant vapor passes through the condenser. Here, the hot refrigerant vapor at high pressure is cooled by the air that is blown onto the finned condensing coils by the condenser fan, as it travels through the coil with fins. The compressor, condenser coil and condenser fan are located in the large noisy box that is in the backyard, often called condensation unit.

Mini Split Air Conditioning – Expansion Valve.

The expansion valve is what really does the job. As the hot coolant passed through a small opening under high pressure into the valve on one side exits as a low pressure cold mist on the other hand because as a gas expands, it cools. So now we have a cool mist at low pressure fluid passing the evaporator coil.

How to Install Split Air Conditioner System. Evaporator Coil.

The low pressure cold fluid exits val expansion valve now passes through the evaporator coil located in the mixing chamber of the furnace. Here the hot air out of your house through the evaporator coil, heating it, while the cold coil cools the air blowing through it and returns home. 
 

Categories Uncategorized
By minisplitwarehouse | Link
May 11, 2013 //
0

How to Install Mini Split AC? Air conditioning compressor. 

The compressor of an air conditioner is the essential part of it, as it is the part which performs the function of cooling is essential in the operation of the air conditioner.
 
The compressor is always installed on the outside of the place to be cooled, while standing inside the evaporator. The first is what does all the cooling process, while the second is the one that distributes the cold room to be cooled.

Split Air Conditioning Systems Installation. Types of Compressors.

There are three types of compressors: centrifugal, rotary and reciprocating or rotary. The last two compressors are used more for weatherization to large areas with central conditioning systems. The first, the centrifugal compressor, is used on the market, for homes and offices.

Install Ductless Air Conditioning. Centrifugal Compressor.

This low cost allows air conditioners do not show excessive prices and are affordable to many pockets. Furthermore, another advantage of the centrifugal compressor is its adaptability to different kind of refrigeration. In any case, the major advantages of the centrifugal compressor with respect to its other competitors, will become the most used on the market. These advantages are reflected in its durability, simplicity of design, and essential, in a relatively low cost.

How to Install Split Air Conditioner System? Benefits.

Finally, we must remember that the same compressor can feed several evaporators, properly interconnected, of course, without losing therefore power the cooling capacity of the equipment.
 

Categories Uncategorized
By minisplitwarehouse | Link
May 11, 2013 //
0

Mitsubishi Mini Split Systems.  Air Ducts. 

The air ducts are the elements of a facility through which air is distributed throughout the system, suction, air handling units, commercial use, air return etc.. This properties determine the quality of the installation, to play a role in certain factors, such as the energy use or the acoustic behavior thereof. 

Fujitsu Mini Split Systems. Types of Ducts.

Within the air distribution ducts, we can distinguish: – Sheet metal ducts. In forming workshop, need a extra thermal and acoustic insulation. – Glass wool ducts. Provide thermal and acoustic insulation. – Flexible ducts. They are limited by a maximum length of 1.2 m by high pressure drop, are used for connections between the main duct and the terminal units.

Best Senville Mini Split Systems. Features: Low cost of Operation.

In the ducts system should combined four important conditions: – Efficient air duct without leakage from the system to the outside (without loss). – A uniform thermal insulation in the walls of the duct which ensures effective protection against heat loss gain (Low Cost of Operation).

Daikin Mini Split. Feature: Low Noise level.

The Acoustic Absorption ensures the lowest noise level. Protecting the pipeline in the event of fire. The Laminate (Foil) Aluminium reinforced fiberglass mesh provides greater resistance to damage, as vapor barrier prevents condensation and its effects, as well as fire retard.  
Categories Uncategorized
« Older Entries
Newer Entries »