Archives For author
« Older Entries
Newer Entries »
By minisplitwarehouse | Link
March 10, 2013 //
0

Heat Pump Reviews – Heat Pumps are very Energy Efficient.

Heat Pumps are currently the most cost-effective form of heating using electricity and most good quality systems achieve average COP (Coefficient of Performance) figures of four or more. This means that to achieve four kilowatts of heating or cooling power, they use an average of less than one kilowatt of electricity. 
 
A conventional heating system such as an electric fire or gas boiler has a COP of less than one. This means that it burns more than one kilowatt of power to produce a kilowatt of heating power. The higher the COP the cheaper a heating appliance is to run. In comparison to other forms of heating, Heat Pumps offer the most energy efficient heating with between 300% to 400% efficiency.
 
The combustion process of wood burners causes fumes, soot and smoke which provide a major burden on the environment in terms of its carbon emissions. As the Heat Pump does not burn anything at the heat energy source, there are no additional carbon emissions other then the small amount of electrical energy required to run the compressor. Heat Pumps are environmentally friendly – most new heat pumps use R410A refrigerant which does not harm the ozone layer if released and is also more energy efficient.

Geothermal Heat Pump Systems –  Heat Pumps Reduce Condensation. 

During summer, when you are using your heat pump for cooling, the room is automatically dehumidified as a function of the Heat Pump. As the warm air circulates through the unit moisture forms on the cold surface of the coil and then drains outside.
 
During winter the heat pump prevents condensation forming on cold surfaces such as windows by circulating warm air around the room similar to demisting a car windscreen on a cold morning.

Heat Pump Systems – Heat Pumps Improve Air Quality. 

Heat pumps don't create smoke or add any fumes to the air. Also, as your Heat Pump circulates the air in your room, the filters clean and purify the air removing dust, mold spores, odours, smoke and other particles. They are excellent for people who suffer from asthma and allergies.  

Heat Pump Prices – Heat Pumps are Safe.

Unlike gas heating or wood burners, there are no flames or hot surfaces that children or pets can touch and burn themselves on. They can also be safely left on while you’re out or asleep.
 
As Heat Pumps become more popular, they are adding value to your home. A warm, dry, comfortable environment with the addition of air conditioning will always be first choice over a house without such sought after benefits. 
Categories Uncategorized
By minisplitwarehouse | Link
March 10, 2013 //
0

Split Heat Pump System – Lubrication Mechanisms.

Assuming that the equipment or system is operating normally, the following operations are performed.

Cleaning equipment and parts. The condenser and evaporator must be carefully cleaned to ensure good heat transfer and avoid contamination and overheating equipment. Lubrication mechanisms requiring it: bearings, bearings, bushings.
 
Reviewing and changing filters in package units, air handlers, fan & coils, minisplits. Filters dirty or damaged impede airflow and reduce the team's efficiency. Filter drier. Normally not given importance to the dryer on air conditioners; often obstructed by dirt inside the system and is very easy to revise.

Split System – No Repairable Parts.

Some time will be needed major repairs, engine changes, compressor and fan blades. These changes will stop the operation of the equipment or system. It is necessary to provide parts or parts that will be required for the unemployed is in the shortest possible time. You can not have in the maintenance shop all parties, but the most critical or frequent: blades, filters, coolant, bearings.

Some parts are not repairable by the maintenance staff, for example, semi-hermetic compressors and motors. They must resort to a specialized workshop for repairing them; depending on location, will be necessary to have a compressor, a motor and valves in perfect condition to make a change.

Mitsubishi Split System – Careful Analysis.

From a careful analysis of the logs of equipment may be necessary to predict when a component replacement schedule and so to get the parts and do it at the right time. To incipient failure, usually, it is easy to determine. Is the point of warning that the computer will fail in a remarkably short time. Examples: metal-metal noise in auto brake pads, bands chirp generator, water pump and excessive noise in aims.

Ductless Split System – Optimal Design.

The proper functioning of air conditioning systems not only addresses issues of comfort, health and welfare of people who work in offices, hotels, restaurants or hospitals, or those living homes heated. Specialized research units, for example, require exceptionally precise design and optimal facilities. Here there can be no mistake. The minimum margin could cause local infections, including pandemic and killed.

Biosecurity is a matter of life or death. Working in biocontainment work concerns not only excellent designs and engineering maintenance services, involves an internship as delicate as preventing the spread in the environment of highly infectious agents, which must remain in total secrecy.
Categories Uncategorized
By minisplitwarehouse | Link
March 10, 2013 //
0

Split System Air Conditioning Reviews – The Cheapest Install.

The installation of your heat pump is a critical step in ensuring the heat pump performs effectively, is located correctly and the warranty is honoured by the manufacturer.
 
Many people opt for the cheapest install, trying to save on overall costs, but this is a decision that can easily be assisted by understanding that the cheapest option may cause untold problems for them in the future.

Split System Air Conditioning Installation – Accredited Installers. 

Experienced, accredited installers are generally qualified refrigeration technicians and/or registered electricians. They understand how a heat pump system works and what affect location and position of both the indoor and outdoor units will have. They have the specialised equipment required to complete the installation and have more often than not attended manufacturer courses on the correct installation and servicing of these systems.

What is a Split System Air Conditioning Unit? Install Various Heat Pump Systems. 

The time it takes to install various heat pump systems can be as short as 3 hours for a very simple back to back installation (e.g. indoor and outdoor units located on either side of the same wall and virtually back to back) or up to an entire day for larger, more complicated installations. Multi or ducted systems may take a few days, depending on the number of units being connected.

 Split System Air Conditioning. Installation Costs.

Installation costs can be significant, so any adverts for extremely low installation costs should be investigated fully before signing on the dotted line.  Make sure the cost of installation is included in your quote.  Simple uncomplicated installations will obviously be cheaper than more involved installations. Some of the factors influencing the cost may be: 
 
The size of the heat pump system being installed the length of pipe run connecting the indoor and outdoor units whether the system can be wired into a local circuit or has to go back to the switchboard the length of capping required to cover pipes to protect them from the elements outdoor unit needing risers (feet) and pavers if not on a concrete path or slab the path the drain will need to take (concrete drillers required, plumbed into existing plumbing, etc.)
 
 

Categories Uncategorized
By minisplitwarehouse | Link
March 10, 2013 //
0

Ductless Heat Pump Reviews – Putrefaction Process.

These air conditioners due to its enclosed spaces such as coils, condensate trays, Draining pipes, etc., Deprived of light at a stable temperature, soil moisture and nutrients and can cause a process of putrefaction that becomes a broth ideal culture for the growth and proliferation of microorganisms of animal or vegetable, consisting of pathogenic bacteria, fungi, yeast or virus.
 
Given this background, the World Health Organization (WHO) in 1982 has established that buildings with a percentage of more than 20% of people who experience acute health and welfare due to pollution levels, make a disease known as Sick Building Syndrome (SBS).

Ductless Heat Pump Cost – Powder.

It has been determined that the dust is the main transporter agent allergic substances, consisting of a variety of organic and inorganic elements, including fibers, spores, pollen, mold, insects and mites produce symptoms ranging from mild irritation to severe breathing problems, which can result in even chronic diseases.
 
The air conditioning ducts from dust containing common to rodents, leaves, bacteria, fungi and molds are a breeding ground for biological contaminants playback due to its constant temperature, humidity and dirt as nutrients.

Ductless Heat Pump – Building Materials.

Moreover, it was found that many of the new materials currently used in the construction and furniture and decor, produce emissions that are slowly joining the indoor air, as in the case of paints, dyes, paints, glues, etc. . Moreover, clothes, upholstery, carpets, curtains and other tissues contribute to the local air inside various fibers and other contaminants.
 
The asbestos used in building components such as fiber cement, suspended ceilings, vinyl flooring, etc., Are mineral fibers with wear disperse in the environment and to penetrate the respiratory system, causing injuries that include stroke, pulmonary fibrosis , lung and pleura. Formaldehyde present in paper, paints, cleaning products, contact cements, glues and wood, chipboard, are very volatile and irritating character causing headaches and nausea.

Ductless heat pump cost – Cleaning System.

There are now modern duct cleaning systems, using natural inputs such as grids or diffusers or by inspection covers to be placed for the purpose for such a role, entering a vehicle equipped with a digital camera automatically, controlled by radio control performing an inspection prior to cleaning.
 
The robot has a propulsive tube which sucks the dust collection bag will carry in one of its ends revolving brushes hard and soft polypropylene according to the degree of adherence of dirt as detailed in Fig. At the time of carrying out the inspection is performed by sampling to be subjected to laboratory analysis.
 
Then, air conditioning ducts are sanitized by methods suction blowoff with compressed air injection and dirt eliminating existing brushing.
 
Once the hygiene, the robot is introduced again to check the duct taking pictures of its interior from various points, providing a videotape of the inspection and cleaning status.
Categories Uncategorized
By minisplitwarehouse | Link
March 9, 2013 //
0

Mini Split Air Conditioner Reviews. Split (wall bracket): 

This model meets local needs and small businesses as cibers cafes, hair salons, barber shops, small clubs, etc. Advantages: easy installation and relatively low cost of the same. Maintenance More spacing and relatively easy. 

Lg Mini Split Air Conditioner. Split (overhead console):

Ideal for small shops and businesses, such as bakeries, shops with high churn and outdoors. Advantages: relatively simple installation and low cost for the type of application. Quiet, and if it is properly installed decor helps many commercial environments. Generally it can be applied in locations that are already decorated without affecting the appearance of the room too. 

Mini Split Air Conditioner. Central (compact or split using fancoils):

This design is applied very often in places where it takes extra comfort and a higher level of decor. Advantages: Gives high value image and costly design. High thermal stability and maintenance relatively spaced in time. 

Mitsubishi Mini Split Air Conditioner. Roof-Top: Roof-Top Units Noted for Their Easy Installation.

 

Being a compact unit, eliminating the refrigerant connections work, and provides maximum flexibility by allowing select from the mouth to the side and bottom lines.
Categories Uncategorized
By minisplitwarehouse | Link
March 9, 2013 //
0

Mitsubishi Mini Split – Properly Insulate House.

To avoid energy losses, it helps insulate the house properly, especially taking special care openings.
 
Another important point is to use blinds, curtains and blinds that can reduce the heating of the housing, preventing direct sunlight reaches the computer. Energy consumption can be reduced by up to 30% if you avoid excessive heat input. Place the air conditioner away from heat sources such as light bulbs and appliances.

Minisplit – The Importance of Ventilation.

Ventilate the house in the early hours of the morning and evening, to avoid excessive heating of the times when higher temperatures are recorded. Similarly, avoid frequently opening doors and windows in the room where the computer is running.

Mini Split Air Conditioner – Clean Equipment Regularly.

The filters of air conditioners are clogged with dust and dirt every day, decreasing its performance. It is important to clean once every two weeks, once a month or at least to reduce consumption. It is also important to check that the equipment is not leaking coolant.

Mini Split System – Calculate the Humidity.

In addition to temperature, it is important to properly regulate the moisture values. According to the advice of IDEA, the values ​​should be between 40% and 60%.
 

Categories Uncategorized
By minisplitwarehouse | Link
March 9, 2013 //
0

Ductless Air Conditioner Reviews – Air Conditioner.

There are more teams that are being installed today, have many advantages unlike air conditioning compact outdoor unit (condenser) is outside the hambientes to weatherize where the compressor is therefore very quiet. They are relatively inexpensive, low-power, aesthetically pleasing and easy to maintain. can be cold or cold-heat pump

Lg Ductless Air Conditioner – Compact or Window Air Conditioner.

It is a square box, that is a closed circuit, for instalarce should make a gap so that it is half on the outside of the wall, are usually noisy, easy to maintain and tend to consume a bit more power, can be cold-cold or heat pump.

Ductless Air Conditioner – Multi Split Air Conditioning.

Multi split are actually several units split with the peculiarity that the compressors are within a single outdoor unit (condenser) and climatizan environments using 2 and hasta 5 indoor units (evaporators) depending on the need. are usually necessary if there is no physical space to install 2 0 3 teams split,  can weatherize homes of more than 100 square meters, houses. can be cold or cold-heat pump.

Mini Split Air Conditioner – Portable Air Conditioner and Cassette:

It is a closed loop in a box on wheels, so it can be transported from one environment to another with ease, have a hose that vents to another environment, are easy to maintain, very quiet and not very powerful , can be cold or cold-heat pump.

Its operation is similar to the compact, but they come with more refrigeration capacity to 60000 BTU, is an efficient equipment for large spaces, is usually mounted in shops and ofinas, its installation is more complex, as it requires a false ceiling and can only visibla expelling air unit, can be cold or cold-heat pump.
 
 
 

Categories Uncategorized
By minisplitwarehouse | Link
March 9, 2013 //
0

Goodman Heat Pumps – Excellence in Homes and Businesses.

The Goodman air conditioning products are produced with some of the best warranties in the industry, this has helped the Goodman brand is recognized as a leading brand in the residential and commercial heating, ventilation and air conditioning today. Goodman Air Conditioner is to become one of the largest manufacturers of central air conditioning, residential heating products, focusing on one thing: the construction of residential and commercial equipment cooling and heating of higher quality in the market.

Trane Heat Pumps – Excellence in Construction.

In 1954, Harold V. Goodman, founder of Goodman Manufacturing Company, became an air conditioning contractor in the city of Houston, Texas.

In 1975, Harold GOODMAN manufacturing air conditioners came with the formation of Goodman Manufacturing Company, Harold Goodman turned his gaze to the building HVAC equipment, recognizing the need for high quality industry, producing central air conditioning systems premium at low cost.

Carrier Heat Pumps – Excellence in Protection and Guarantees.

Goodman today, is focused on providing high quality products at an affordable price, and the protection that we believe is one of the best warranties in the industry. This clear focus has led to Goodman being a main drive manufacturer of residential and commercial heating and central air conditioning products and residential airconditioning Goodman Norte.Hoy America is the leader in product value and residential air conditioning , all due to Harold Goodman's vision.

Lennox Heat Pumps – Excellence in Distribution.

Goodman Global, Inc., is the second largest U.S. manufacturer of heating, ventilation, air conditioning and central air conditioning and air conditioning for residential and commercial use. Goodman Global currently sells its products through a distribution network in North America with over 900 distribution points.

Categories Uncategorized
By minisplitwarehouse | Link
March 9, 2013 //
0

 

Mini Split Air Conditioning Units. Conditioning Refrigeration.

Refrigeration is the process used in air conditioners: consists in producing cold, or better, to extract heat to produce cold since what is done is to carry heat from one place to another. So, the place to which he removes heat cools. As can exploit temperature differences to produce heat, to create differences of heat energy is required.
 
Usually the air conditioning refrigeration is produced by two systems: compression refrigeration or cooling by absorption.

Mini Split AC Units. Compression Refrigeration System.

The conventional cooling and the most used in the air conditioning, is the compression refrigeration system. Mechanical energy through a refrigerant gas is compressed. By condensing this gas emitted before the latent heat evaporates, it had absorbed the refrigerant to a lower temperature level.
 
To maintain this cycle employs mechanical energy, usually by electrical energy. Depending on the costs of electricity, this cooling process is very costly. Moreover, taking into account the efficiency of power plants, only a third of the primary energy is used in the process. Furthermore, the refrigerants employed nowadays belong to the fluorochlorocarbons, which on the one hand damage the ozone layer and on the other hand contribute to the greenhouse effect.

Best Mini Split Systems. Absorption Refrigeration System.

An alternative method is for absorption refrigeration. However, this absorption method is typically used only when there is a residual heat source or cheap, so cold production is much more economical and environmentally friendly, but their performance is significantly lower. In these systems the energy supplied is first thermal energy.

Ductless Mini-Split Air Conditioner. Absorption Refrigeration Cycle.

In the absorption refrigeration systems distinguishes between two circuits, the circuit of the refrigerant between thermal compressor, condenser and evaporator, the solvent and the circuit between the absorber and stripper. A remarkable advantage of absorption systems is that the refrigerant is not a fluoroclorocarbono. 

The solvent mixture of refrigerant and air conditioning applications and for temperatures greater than 0 ° C is water and lithium bromide (LiBr). In applications for temperatures down to -60 ° C is ammonia (NH 3) and water. To date no other appropriate mixtures found for these applications, but are developing adsorption systems, in which the refrigerant is absorbed in solid matrices of zeolites.

Categories Uncategorized
By minisplitwarehouse | Link
March 9, 2013 //
0

Mini Split Air Conditioning Units – Energy labels on Air Conditioners.

The energy label values ​​reported energy and water consumption of the apparatus (efficiency), as well as the benefits thereof. That is, how well an appliance is able to perform their tasks (effectiveness). It is mandatory for refrigerators, freezers, washers, dryers, dishwashers, ovens and air conditioners.
 
This tag is mandatory since 2004 for a European standard that, in the case of air conditioning, air conditioners concerns, heat pumps, air-to-air systems or air-water power exceeding 12 kW.Tiene the great advantage that guides immediately to the cheapest equipment and forces eficientes. Esto manufacturers / suppliers, in turn, to perform thereafter, for each model that is introduced in the market, a series of tests that measure the parameters indicative of consumption energy and reflect the results of these measures on the label.

Mini Split System Installation – (Sources: IDEA and various sources).

Energy class in cooling and heating mode, enter the effective power coefficient and restored electrical power consumed.
 
COP (Coefficient of Performance): Efficiency. Is the ratio of the total heat dissipated power in watts and the total electrical power consumed by the equipment of AA, during a typical period of use.
 
EER: Cooling efficiency coefficient. Represents the energy efficiency of the heat pump when operating in cooling mode.

Mini Split Air Conditioning – The domestic air conditioning machines subject to mandatory labeling is the type:

Noise factor of no small comfort, the noise emitted by the device is measured in decibels. It is not easy to describe but allows comparison with other products. – Air Systems-Air and Water-Air: This binomial states in the first position, the type of refrigerant circuit and the cooling fluid type, which is the carrier of the cold that comes into our homes, which in all cases domestic, is air. – With refrigerating capacity exceeding 12kW. – Systems: Split, Multi Split, compact and portable. Split systems are called which have separate indoor and outdoor unit, the inside may be one or more (multi-Split); compact and portable carrying the two units together. – In cooling mode only and heat pump.

How to Install Split Air Conditioner System.The information on the label reflects, at least:

Energy Efficiency Class from A (highest) to G (lowest). The annual energy consumption (kWh / year, based on an average use of hours at full load). The cooling capacity (in kW). The EER / COP, or coefficient of efficiency heating and cooling, respectively.
 
The most complex, when estimating the consumption of air conditioning equipment, is to calculate the total, as the team can make many variations and performance, will aggregate between two of its main components: the evaporator and compressor . Furthermore, can have separate indoor and outdoor units (split), thereby, the overall performance is the performance combination of each of these units.
 
 
Categories Uncategorized
« Older Entries
Newer Entries »