Sometimes it may happen to have a window air conditioner and do not have the space to install it. What can you do in this situation. Well, you could make a hole in the wall of the chimney, but this may not be very practical. The best alternative is to create a wall outlet for a portable air conditioning unit having an exhaust hose.
Mitsubishi 3 Ton Mini Split. Opening for the exhaust pipe.
Now use a jig saw and cut a hole about 4 inches in diameter through the layers installed: insulation, drywall, brick. Wall vents – Use silicone caulk and the final layer of the vent to be installed inside the house. Push the vent from the outside to the hole. Use 1-inch screws to secure the wall vent.
Place the exhaust vent on the inner wall of the house. Then secure to the interior wall and into the atmosphere with some tape. The seal must be hermético.Esto increase efficiency and reduce noise.
4 Ton Mini Split. Pipe Connections.
Extend the hose so that it fits in the exhaust duct wall. Use the tape to secure it. Electricity – Connect the portable air conditioner and turn it on. Adjust the temperature and wait to see if the unit cools the air properly.
Mini Split AC in the USA 