« Older Entries
Newer Entries »
By minisplitwarehouse | Link
May 24, 2014 //
0

Mini Split Heat Pump Reviews in Sacramento – What Are Smoke Dampers?

Smoke dampers are a type of building material used to prevent smoke from spreading throughout the structure during a fire. Contractors install these dampers in HVAC ducts to block the flow of smoke in heating, ventilation, or air conditioning systems. Smoke dampers represent a critical part of the life safety system within a building. Many building codes require these dampers to help save lives and reduce injury during a fire. Some building owners or homeowners may also use smoke dampers on a voluntary basis to improve safety for occupants and residents.

Mitsubishi Mini Split Heat Pumps in Sacramento – Smoke Dampers.

A smoke damper fits tightly within an HVAC duct and is designed to allow air to flow freely under normal conditions. When smoke is present, smoke detectors send a signal to an actuator in the damper, causing it to shut off air flow through the duct. Some systems may also include manual dampers, which can be opened or closed using a switch on the outside of each duct. Others allow operators to push a single central button to shut all dampers at once during an emergency.

Mini Split Heat Pumps in Sacramento – Gate-style Smoke Dampers.

Different types of smoke dampers utilize a variety of operating mechanisms to stop the flow of smoke and air. Gate-style smoke dampers feature a metal gate or door that drops down to seal off the duct. Baffle units feature vents, or baffles, that close off the duct as needed. Rotational units include a central plate that runs perpendicular to the duct under standard conditions, but rotates to completely close off the duct during a fire.

Ductless Heat Pump in Sacramento – Smoke Exposure.

One of the primary advantages associated with smoke dampers is their ability to save lives during a fire. By slowing or stopping the spread of smoke, they give occupants more time to exit the building while reducing smoke exposure. By limiting smoke exposure, dampers help to minimize smoke-related injuries and keep people conscious and alert.
 

Categories Uncategorized
By minisplitwarehouse | Link
May 23, 2014 //
0

Best Central Air Conditioning Units in Fresno – What Are the Different Methods for Ductwork Installation?

There are different methods of ductwork installation driven by the types of heating/cooling plants in homes as well as by design layouts. Ductwork designs are extended plenum, radiant piping or a combination of these. Some run through a ceiling instead of an attic, and others run through a crawlspace or basement, but all designs have their base in the furnace placement. 

Best Central Air Conditioning Units 2014 in Fresno – Ductwork Installation.

Many localities have energy-efficiency codes, and ductwork installations must meet these standards. Newer duct materials have changed some methods, and experimental prototypes for hot/humid climate home construction have led to further innovations from the old tried-and-true ductwork installation plans.

Best Air Conditioning Units in Fresno – Gas Air Furnaces.

The ductwork installations for gas air furnaces are specific to safety concerns when using gas. For safety, all components and fittings of ductwork for a gas air furnace system must meet performance temperature ratings, as well as smoke development and flame spreading ratings. Some residences and light commercial buildings have ductwork installation designs with the ductwork on the outside of the building. Inside installations need only insulation wraps, but outside installations need water-resistant sealant and weather protectant applied as well.

Best Air Conditioners in Fresno – Electrical Central Heating, Ventilation and Air Conditioning (HVAC) Systems.

There are standards for the installation of electrical central heating, ventilation and air conditioning (HVAC) systems. These ductwork installations must have no leaks and a balance between the supply air and the return air. There should be no loss of airflow velocity because of crimping, improper sizing or bends too closely set to extended plenums. 
 

Categories Uncategorized
By minisplitwarehouse | Link
May 23, 2014 //
0

Heat Pump Air Conditioning System in San Jose – How Do I Choose the Best Central Heating Thermostat?

There are many different types of thermostats available for home central air and heating (HVAC) systems. Each type of central heating thermostat performs the same basic function: regulating the inside temperature of the home. Optional functions vary by thermostat model and include the ability to program different temperatures for different times, control over multiple heating and cooling systems, and remote access to thermostat controls. To choose the best thermostat for your needs, consider which optional features you will be most likely to use.

Heat Pump Air Conditioning not Cooling in San Jose – Central Heating Thermostat.

A basic central heating thermostat is best for households that want to maintain a constant temperature in the home at all times. These units allow you to adjust the temperature and turn the central heating system on and off. Some models feature digital displays with buttons to adjust the temperature setting, while others use simple dial or slider controls.

If there are times when no one is in your home, a central heating thermostat that you can program by the hour may be your best choice. With this type of HVAC thermostat, you can program a lower temperature setting for the times when the house will be empty, which can save money on your monthly electric bill. Program the thermostat to return to your preferred temperature about an hour before you return so that the house is warmed back up without a wait. 

Heat Pump Air Conditioning Troubleshooting in San Jose – Settings.

You may program these thermostats by the day or for up to seven days at a time. Various models allow you to choose between options such as setting different temperatures seven days in a row; setting different temperatures for weekdays and weekends; and setting different temperatures for Monday through Friday, Saturday and Sunday.
 

 

Categories Uncategorized
By minisplitwarehouse | Link
May 23, 2014 //
0

Heat Pump Home Depo in Long Beach – What Are the Different Methods for Ductwork Installation?

There are different methods of ductwork installation driven by the types of heating/cooling plants in homes as well as by design layouts. Ductwork designs are extended plenum, radiant piping or a combination of these. Some run through a ceiling instead of an attic, and others run through a crawlspace or basement, but all designs have their base in the furnace placement. 

Heat Pump Air Conditioner Cost in Long Beach – Ductwork Installation.

Many localities have energy-efficiency codes, and ductwork installations must meet these standards. Newer duct materials have changed some methods, and experimental prototypes for hot/humid climate home construction have led to further innovations from the old tried-and-true ductwork installation plans.

Heat Pump Air Conditioner in Long Beach – Humid Climates.

Additionally, there is semi-rigid flex piping that can be run individually to each room, and there are claims that it diffuses noise pollution in the home. Further, these semi-rigid pipes have been tested and proven to deliver better air quality over time, extracting damp air in humid climates and not allowing dust to settle and trap mold.

Window Heat Pump Air Conditioner in Long Beach – A Newer Type of Ductwork Installation Design.

A newer type of ductwork installation design has been tested and found to be a considerable improvement over any other ductwork installation design for use in humid and hot climates. Making use of specific calculations, these designs make use of running ductwork in the interior of the home under the ceiling plane at a much lower cost and produce zero-energy homes. There can be no duct leakage to the outside, and conducive gains/losses are eliminated because there is no heat buildup in an attic for the ductwork to have to deal with, so the set point temperatures remain nearly constant in the ducts. These designs also make use of transoms in each room to promote good airflow to returns.

Categories Uncategorized
By minisplitwarehouse | Link
May 23, 2014 //
0

Ductless Heating and Cooling Units in San Francisco – What Is a Ductless Air Conditioner?

A ductless air conditioner is an air conditioning system that allows homeowners to enjoy the benefits of cooled air without the high cost of duct work. They are an affordable alternative to central heating, ventilating, and air conditioning (HVAC) systems, which rely on an extensive network of ducts to move air. Ductless air conditioners are considered to be more efficient and easier to maintain than window-mounted units.

Heating and Cooling Units Prices in San Francisco – Ductless Air Conditioner.

Often called a “split system,” a ductless air conditioner is made up of two parts. There is a compressor, which is placed outside of the home, and a fan, which is installed in the room that is to be cooled. The fan can be wall-mounted, concealed in a drop ceiling, or set on the floor. The two units are connected using piping or conduit. The conduit contains lines for refrigerant, condensate, and electricity to run the unit.

Heating and Cooling Units in San Francisco – High Level of Energy Efficiency.

Another major benefit to using a split system air conditioner is the high level of energy efficiency associated with these units. Cool air is directed to the room where it is needed instead of all over the house. There is no issue of air leaks, which are common when cooled air travels through duct systems. The entire system can be controlled by a thermostat, so that the temperature in the room is kept exactly where it is set by the homeowner.

Heating and Cooling Window Units in San Francisco – Cost of Adding Ductwork.

The main benefit of a ductless air conditioner is that it allows homeowners to save on the high cost of adding ductwork, which often involves tearing down walls or ceilings. This is particularly useful in older homes that have no central duct system. Many people also rely on ductless air conditioners to cool home additions, including sun rooms or garages.
Categories Uncategorized
By minisplitwarehouse | Link
May 23, 2014 //
0

Ductless Air Conditioners in San Diego – What Is a Ventilation Duct?

HVAC stands for heating, ventilation, and air conditioning. Ventilation is part of the process of heating or cooling air, which creates comfortable temperatures in a space. Air must be moved to and from a heating or cooling unit. Heated or cooled air, also known as conditioned air, is then moved out to the living or working space. This is done through the use of a ventilation duct. As the conditioned air is delivered, an equivalent amount of air must then be moved to the unit once again so it too can be conditioned.

Mitsubishi Mini Split Air Conditioners in San Diego – Ventilation Duct.

While many homes today are built airtight for greater energy efficiency, the ventilation process helps substitute fresh air for stale air, which is then exhausted from the space. Both can occur by way of ventilation ducts. Some HVAC systems, often in commercial environments, allow the same air to be recycled or reconditioned. This is simply transferred air and not recommended. Too many pollutants can contaminate air and diminish oxygen, requiring another method of ventilation or air purification to obtain and maintain optimal air quality.

Mini Split Air Conditioners in San Diego – Exhaust Fan.

Such systems may employ intermittent ventilation, which means certain high-risk areas are ventilated quickly to remove contaminants or even moisture. A good example is the use of an exhaust fan. However, in many residential settings, continuous or central ventilation is preferred. Continuous ventilation is simply the process in which stale air is replaced with fresh air on a slow yet steady basis.

Portable Air Conditioners in San Diego – Flexible Materials.

The ventilation duct system is generally designed in a way that allows for the most efficient delivery of fresh air to the system and conditioned air to the receiving spaces. The less air has to travel, the less likely it is to lose temperature or to be contaminated. A ventilation duct, or parts of it, may be made from rigid or flexible material. Flexible parts of the ventilation duct are generally smaller lengths, frequently used to conveniently attach rigid ductwork to the system. Flexible materials may also be used in other difficult to manipulate spaces.
 
Categories Uncategorized
By minisplitwarehouse | Link
May 22, 2014 //
0

Ductless Heat Pump in Los Angeles – How Do I Choose the Best Air Conditioning Thermostat?

The basic function of an air conditioning thermostat is to turn the cooling unit on and off at a preset temperature. Choosing the best air conditioning thermostat depends largely upon your own individual needs, lifestyle, and energy consciousness. Air conditioning thermostats are available in several different styles from basic manually operated models to multifunction programmable types. A simple manually operated air conditioning thermostat works best if you prefer to keep the indoor air temperature at a constant level at all times. Programmable thermostats are a better choice if you are away from home for several hours each day and want to save energy.

Ductless Air Conditioning Review in Los Angeles – Air Conditioning Thermostat.

In its simplest form, an air conditioning thermostat is a temperature activated device that automatically controls the operation of the cooling unit. The purpose of this device is to maintain a constant indoor air temperature in a home or building. A manually operated model is usually sufficient for this purpose. Many people prefer to raise the air temperature when the home or building is unoccupied to conserve energy or save on cooling costs.

Ductless in Los Angeles – Programmable Thermostat.

A manually operated air conditioning thermostat can easily be set to a higher temperature when leaving the home or building each day, but you may find that the air is too warm upon returning. You may also forget to make the necessary temperature adjustment before leaving for the day. A programmable thermostat is usually more suitable than a manual model if you wish to make daily temperature adjustments. It can be set to raise the temperature automatically when you leave and lower it shortly before you return. This function conserves energy during unoccupied times and returns the temperature to a comfortable level when or before you return.

Ductless Air Conditioner in Los Angeles – Daytime and Nighttime.

In addition to raising the air temperature during unoccupied hours, you may also want to adjust it at night while you sleep. Many programmable thermostats are capable of storing multiple settings for both daytime and nighttime hours. A slightly warmer air temperature can be selected during sleeping hours and automatically lowered again before you awake. Some programmable thermostats can also distinguish between days of the week so that different settings are observed on weekends. These models sometimes allow you to override the regular settings if you come home early or for special occasions such as holidays.

Categories Uncategorized
By minisplitwarehouse | Link
May 22, 2014 //
0

Mitsubishi Split Air Conditioners in Mesa – What is Room Air Conditioning?

Room air conditioning, also known as window air conditioning, is a good alternative to central air conditioning for renters who live in older homes or those who have only a small space to cool. Additionally, even though they cost more to operate, room air conditioning units are attractive to those on a tight budget because they have a lower up-front cost. Room air conditioning units can be purchased for as little as $200-$300 US Dollars (USD), while central air conditioning systems cost thousands of dollars to install.

Split Central Air Conditioners in Mesa – Room Air Conditioning.

Window air conditioner units can be purchased at any home improvement store. Although it's natural to assume that bigger is always better, many people make the mistake of purchasing air conditioning units that are too large. If the unit you choose is too large, it will cycle on and off more often than necessary. This will wear down the machine faster and result in a higher energy bill for you. 

Split Air Conditioners in Mesa – Size of Air Conditioner.

To determine what size of air conditioner you need, look at the size of the area to be cooled. For small rooms of 100 to 150 square feet (30.48 to 45.72 square meters), 5,000 Btu's is sufficient. For a studio apartment of 900 to 1,000 square feet (274.32 to 304.8 square meters), however, you'll need a high-powered unit with 18,000 Btu's.

Mini Split Air Conditioners in Mesa – ENERGY STAR®.

When looking for room air conditioning units, consider purchasing a product that is ENERGY STAR® qualified as having met the guidelines set by the US Environmental Protection Agency and the US Department of Energy. These products use 10 percent less energy than conventional room air conditioning units and often include features such as timers that allow for better temperature control when you're away from your home during the day. In this way, ENERGY STAR® products help prevent global warming while saving you money on your home cooling costs.
 
Categories Uncategorized
By minisplitwarehouse | Link
May 22, 2014 //
0

Split System Heat Pump in Tempe – What Are Indoor Air Conditioners?

Indoor air conditioners are systems or units that help to regulate the internal temperature and humidity of a room. Air conditioners are also sometimes used to increase indoor air quality as this can have an effect on the health of people who use the building. Some examples of indoor air conditioners include portable air conditioners, central air conditioners and window-mounted air conditioners.

What is a Split System Air Conditioning Unit in Tempe? Indoor Air Conditioners.

 
Portable indoor air conditioners are usually used in small rooms or locations that don’t require temperature regulation on a regular basis. For example, in countries where temperatures rarely become uncomfortably hot, a portable air conditioner may be the best solution because it doesn’t require any installation. Portable units are often placed on rollers in a room and require a hose or vent that connects the conditioner to the outside in order to remove heat. These units come in a variety of power levels to suite the needs of a particular room size.

Split System Air Conditioning in Tempe – Many Rooms.

Another consideration is how many rooms need to be air conditioned. A portable air conditioner will usually not be powerful enough to cool more than one room. Central air conditioning systems can be much more powerful.

Ductless Air Conditioning in Tempe – Offices and Homes.

There are several reasons why indoor air conditioners are important for offices and homes. The most obvious is that above a certain temperature a building becomes uncomfortable to occupy for long periods of time. This can reduce the effectiveness of workers or the comfort of those living there. Air conditioning units can also help the quality of air that workers breathe, which is important for health.
Categories Uncategorized
By minisplitwarehouse | Link
May 22, 2014 //
0

Split Air Conditioning Systems in Tucson – What is Mobile Air Conditioning?

Mobile air conditioning is a term that is used to describe home air conditioning systems that are easily detached and stored when they are not needed to keep the home comfortable. These types of air conditioning units are usually somewhat small in size and will set on a flat surface somewhere within a room or hallway. Unlike central air conditioning or even window air conditioners, the mobile units make use of expandable plastic ducts in order to vent warmer air from the space.

What is a Split AC System in Tucson? Mobile Air Conditioning.

As a room air conditioning option, a mobile air conditioning unit is normally the size of a small end table and is relatively lightweight. For the most part, systems of this type are intended to cool a single room, although some models are equipped to cool larger spaces. While a system of this type is usually considered to be a form of ductless air conditioning, most mobile units do require some means of venting air to the outside. This is usually accomplished with the aid of plastic ductwork that can be attached to the device on one end while the other end is ran out a nearby window.

Still, mobile air conditioning can be extremely helpful in a number of situations. The mobile units are ideal for use at lake cabins and other weekend getaways when the temperature and humidity begin to rise. Some people keep a mobile air conditioner on hand in the event that the home’s central air system fails for some reason. Since the purpose of the units is usually to offer temporary relief from humidity and heat, the awkwardness of the units setting in a room can be overlooked for the short term.

Split Air Conditioner in Tucson – Sizes of Mobile Air Conditioning Units.

Many home stores and hardware stores will carry at least one or two different sizes of mobile air conditioning units. As with window units, it is possible to purchase relatively small units that will adequately cool a small space or larger units that can keep a larger and more open room comfortable even in high temperatures. While mobile units tend to cost a little more than window units, they are an ideal backup system and much easier to store when not in use.
 

 
Categories Uncategorized
« Older Entries
Newer Entries »